Hellcat L2 Triple Pump Fuel System by Fore Innovations
- Product Fitment
- Reviews (0)
Are you planning on turning up the wick on your Hellcat Challenger or Charger? If so this is definitely an upgrade you must consider. If you plan on increasing the horsepower output of your 6.2L HEMI Hellcat whether its, changing the supercharger pulleys, getting a set of our CNC ported Hellcat heads, etc. then you have to consider the new demands on the stock fuel system. That last thing you want to do is run your Hellcat 6.2L HEMI engine too lean. Fore Innovations has a long history of providing top-shelf aftermarket fuel systems to increase the volume of fuel supplied to HEMI engines after upgrades have been made.
Boost Referenced Return System for 1800+ rwhp. Filtered fuel is sent to one rail first, then crossed over to the second rail, then terminates at the regulator.This fuel system includes:
- LX / LC Hellcat Fuel Pump Module (triple pump)
- F2i Fuel Pressure Regulator
- 88mm Inline Fuel Filter
- Billet Hellcat Hemi Fuel Rails
- LX / LC Hellcat OE Feed Line Blockoff Plug
- All fittings, hose, hardware required for typical fuel line plumbing
- 30 feet of fuel line and 10 matching hose ends (your choice)
- Qty 7, billet low profile 90 degree o-ring fittings
- Qty 3, straight AN to ORB fittings
- Qty 1, -8 ORB plug
- Qty 10, hose straps and mounting screws
Notes on Hellcat OE Fuel Pressure Sensor Options:
By default, our fuel system will delete the OE fuel pressure sensor. Due to popular request, we have added the following provisions for the fuel pressure sensor, which must be selected by the purchaser:
- Delete OE Fuel Pressure Sensor
- Inline Aftermarket Sensor: includes a new AC Delco sensor and provisions to mount in a high flow coupling with two more hose ends. In L2 and L4 systems, this can be installed without extending the OE electrical harness; however, extension of the OE harness may still be required on L3 systems.
- Regulator Mounted Aftermarket Sensor: includes a new AC Delco sensor and an adapter to mount directly on the fuel pressure regulator. The installer will have to extend the OE electrical harness to accommodate the new location of the sensor.
- 2015+ Charger SRT Hellcat
- 2015+ Challenger SRT Hellcat
There are no related products