Call Today: 276.666.1934

Over 40 Years of HEMI Experience!


Due to higher than average volume and current responses by some manufacturers to the COVID-19 pandemic, shipping and response time may be slightly longer than normal. We apologize for the inconvenience and thank you for your understanding and support.

Dodge Charger Hellcat Automatic Carbon Fiber 1-Piece Driveshaft

SKU:DSS-CHSH11-ACV-C-D
Free Shipping at ModernMuscleXtreme.com / MMX
Dimensions:25x28x25
Weight:25.0 lbs
1749.99000.0000
 
*Possible Lead Time Notification  
I Understand That There Could Possibly Be a 4 - 6 Week Lead Time for This Product

Base Price: $1,749.99
Customized Price: $1,749.99

Please select the available options below.

Options with an (*) are required.
Once you have filled in all the required options and pressed the Update Options button you will be able to add this item into your shopping cart.

  • Description
  • Product Fitment
  • Reviews (0)
**Please Note That DSS Products Could Possibly Have a 4 - 6 Week Lead Time Depending on the Product Type.

Free Ground Shipping Provided by Modern Muscle Xtreme!

This 1 piece high performance carbon driveshaft for your 2015 & 2016 Hellcat Charger delivers a much more crisp transfer of energy from you transmission to your Hellcat's rear end. Take a minute to read below to understand why this performance upgrade is a MUST HAVE for any Hellcat owner.

This single shaft is the same design that we have been using in most modern muscle cars for the last 2 years and is a proven and trouble free shaft for the Challenger and now the Hellcat. This shaft will replace the stock 2 piece shaft and eliminate the disconnected feeling you get from the stock shaft with its Giubo (rubber drive) and soft hanger bearing rubber. The stock shaft has to have the Guibos twist, then the hanger bearing moves up and only after all this happens the car will start to move.

With this new Carbon Fiber (also available in aluminum) that uses a 1350 joint on one end and a Custom CV on the other will make the car feel more connected or more athletic. The response from the gas pedal will be more responsive and will increase 60ft times at the track. This shaft will require a small spacer installed under the front mount of the diff (simple as removing the bolt and slipping it in) to ensure clearance on the rear section of the shaft. This is balanced like all shafts on our 9500rpm balancer so you know its done to the best standards available today.

1. 1350 u-joint
2. Custom 108mm CV with high speed boot and special grease
3. Spline made from 300m and installed into aluminum head for superior strength and light weight
4. Balanced on our high speed machine
5. Comes complete with all high grade hardware (not more bent Guibo bolts)
6. Rated for 1000hp +
7, 1-year warranty.
8. 30lbs

*While carbon fiber driveshaft’s offer superior performance, we recommend these driveshaft’s for race applications only. When the surface of a carbon fiber driveshaft becomes damaged by debris from the road or any other source, the resulting surface imperfection can lead to failure. For this reason we highly recommend the aluminum shafts for daily use. With a driveshaft made of either material, surface imperfections can be the start of a failure. For this reason we recommend the removal of heat shields and sound deadening material in the tunnel area. * Carbon Fiber Shafts Are Made To Order 2-4 Week Lead Time.
 
2015 - 2016 Dodge Charger Hellcat - Automatic Transmission 
Related Products:
There are no related products  
Copyright © 2020 Modern Muscle Performance All Rights Reserved.
https://www.p65warnings.ca.gov/ Warning