Skip to Main Content
Call Today 276-666-1934
Over 40 Years of HEMI Experience!
Now accepting PayPal
Automotive Your Way

6.4L HEMI Hot Rod Crate Engine by MMX

SKU:
MMX-HRC392
Dimensions:
10x10x10
Weight:
100.00 lbs
    **Please check local and State laws for emissions compliance before purchasing this product**
    Making selections in the following sections may change the final product price.
    Max Effort Stock Piston Cam, Low Idle Vaccum, Race/Radical Idle, 4000+ Stall Recommended, 600+ Crank HP Capable with Hi-Ram Intake
    Daily Driver Friendly, OE Converter Friendly, Mild Idle
    More Street/Strip Oriented, More Radical Idle, 3000-3400 Stall Recommended Higher Numerical Ratio Rear gears
    +10-15HP
    MUST USE CARB WITH MMX IGNITION CONTROLLER
    *Subject to availability. CALL TO CHECK STOCK BEFORE ORDERING*
    8.750" Tall. Must Purchase Holley Fuel Rails Separately
    *VERIFY HOOD CLEARANCE BEFORE ORDERING* Includes Fuel Rail Brackets and Holley Sniper Fuel Rails
    This Includes a custom MMX 4150 to Hellcat TB adapter, MMX custom air filter adapter to allow the use of an old school 14 inch round air filter, and 14 Inch Round Air filter,. Also Includes fuel rails.
    Recommended for applications using OEM chrysler engine management (OEM PCM)
    Recommended for Aftermarket ECU's that do not have VVT control (Holley, Megasquirt)
    Recommended for Customers Wanting to run this engine with a Carb

    Summary

    $8,995.00
    $8,995.00
    392 HEMI Hot Rod Crate Engine by MMX! 

    The Engine Comes with No Intake Manifold, you MUST make an intake manifold selection otherwise the engine will be shipped without an intake manifold. 


    What is Not Included:
    • Engine accessories not included (Alternator, A/C, etc) 
    • ATI balancer (Factory 6.4L included)
    • Billet water neck (Factory included)
    • Fuel Injectors (Selection Must be made or engine ships without injectors) 

    What is Included:
    • MMX Billet Valve Covers with Breather Conversion (Engine Ships with Metco Breather, and PCV Valve) 
    • Coil packs
    • MMX/Steffs oil pan (Rear or Center Sump) 
    • MMX Custom Camshaft 
    • PSI 1511 Valve Spring Kit 
    • Camshaft limiter OR Lock Depending on engine management used
    • Premium .083W pushrods
    • Timing cover and water pump
    • MOPAR Performance 45 Degree Oil filter adapter
    • Hellcat 92mm throttle body 
    ***If you would like to purchase this engine and require it to be shipped somewhere other than the lower 48 United States, please call for custom pricing.



    Real MMX Dyno Results



    Shipping Notification:
    A custom quote is required for ALL residential shipping addresses. Please call 276.666.1934 to speak one of our sales techs. Thank you.

    6.4L HEMI Hot Rod Crate Engine by MMX fits the following vehicle(s):

    PayPal Acceptance Mark
    Loading...