If you have been instructed by the MMX Staff that your build requires measuring for your pushrods, then this is the kit you need!
This kit will take the guess work out of exactly what pushrod length you need, and you can be sure you don't have too much, or not enough preload on your Hemi's lifter!
The stock non MDS Hellcat lifter requires .050-.80 preload to properly function. If you have less than .040 lifter preload, it can cause a very loud ticking.
Gen3 HEMI Pushrod Length Measuring Tool Kit by MMX/Manton fits the following vehicle(s):
Gen3 HEMI 5.7L, 6.1L, 6.2L, 6.4L
