FC2 HEMI Fuel System Harness and Controller by Fore Innovations

SKU:FOR-23-100
Dimensions:8x8x2
Weight:2.0 lbs
179.00000.0000
**Please check local and State laws for emissions compliance before purchasing this product**
 
*Build Induction Description  
Intake Manifold Type
Power Adder(s)
FC2 Configuration Options  
Basic with unassembled APP connector
6 GA power/ground harness and 80A fuse , Add $30.00
Add Two Pump Pigtails, Add $20.00
Circuit breaker upgrade, Add $10.00
*Pump 1 Fuse (required)  
20A - Recommended for GSS341 / 342 / 340
25A - Recommended for F90000262 / 267 / 274 / 352
30A - Recommended for F90000285 / 295
*Pump 2 Fuse (required)  
20A - Recommended for GSS341 / 342 / 340
25A - Recommended for F90000262 / 267 / 274 / 352
30A - Recommended for F90000285 / 295

Base Price: $179.00
Customized Price: $179.00

Please select the available options below.

Options with an (*) are required.
Once you have filled in all the required options and pressed the Update Options button you will be able to add this item into your shopping cart.

  • Description
  • Product Fitment
  • Reviews (0)
These wiring harnesses by Fore Innovations are a MUST HAVE if you are upgrading your fuel system with a our single pump performance system with the intent to add a second pump. Even without the addition of the second pump, these harness are absolutely ideal for peace of mind in supplying your new fuel system all of the voltage it needs without worry.

Features:
  • Electrical solution for dual pump return fuel systems for efficient load handling and power distribution
  • Simple trigger system works with basic switched 12V+ on/off (6.5V+ minimum)
  • Runs two pumps full time (see FC3 for staging pumps)
  • 30 amp x 2 capacity, 99.3% efficient
  • Replaceable internal fuses for each pump
  • May also be used on other DC motors such as intercooler, water (check current requirements)
  • NEW High Current APP® connectors pre-installed on main power/ground wires for maximum connection integrity and reliability
Available Configurations:
  • Basic: comes with unassembled APP® connector for main power and ground
  • Add Main Power and Ground Harness: 15' 6 AWG power, 3' 6 AWG ground assembled to APP® power connector with 80A inline fuse.
  • Add Pump Pigtails: two pairs of 7' 12 AWG pump wires assembled to Delphi pump connectors and unassembled male Delphi connectors.

Warnings:
  • do not operate with over 16.5V supplied power
  • for interior installation only
  • run only one pump per output (two maximum)

Accessories:
Replacement 6 AWG APP® main power connector, unassembled
 
Fore Fuel Systems 
Related Products:
There are no related products  
Sales Tax:  Sales tax at Modern Muscle Xtreme (MMX) and its subsidiaries is based on State and local requirements. For more information, please reference our Sales Tax Policy page.
Copyright © 2024 Modern Muscle Performance All Rights Reserved.
https://www.p65warnings.ca.gov/ Warning